Ranger Next Gen Mudflaps Volcano Off Road

Ranger Next Gen Mudflaps Volcano Off Road

Standard tub-body Ranger mudflaps, not tray-back

$268.00
RRP $298.00
SAVE $30.00 (10%)
In Stock
Ranger Next Gen Volcano Off Road Mudflaps 4 piece front and rear. Black 4.2mm thick TPE Mudflaps No Drill fitment. Protect you Ranger with wider stronger mudflaps. Fits with Volcano P25 flares, Utemart S35 flares, Volcano R30 flares, EGR (Ford) flares. Select size. TPE (Thermoplastic Elastomer) mudflaps offer superior flexibility, durability, and impact resistance, making them ideal for rough terrain and cold weather without breaking.



SIze

Will These Mud Flaps Fit My Ranger?

Short answer: these Volcano Off Road +30mm mud flaps suit Ford Ranger Next Gen 2022-2026 dual cab models with the standard tub body. They pair directly with Utemart P25, Utemart S35 and EGR Ranger flares, and are a strong add-on when you want the rear of the ute to look better covered with wider wheels and tyres.

Most customers looking at this page are already comparing or fitting flares, 285 tyres, 9 inch wheels or a lower offset wheel package. The problem is not just mud on the paint. It is the rear view of the ute: once the tyre sits wider, the factory mud flap can look tucked in and unfinished.

For the full flare breakdown, check out our Utemart write-ups, especially the Ranger mudflaps for flares and 285 tyres guide, the Ranger Next Gen flare comparison guide and the P25 slimline flare guide.

This is the standard tub-body Ranger kit, not the tray-back kit and not the Ranger Raptor kit. If your Ranger has a tray back, use the Ranger tray-back mud flap kit. If you have RR25 flares on a Ranger Raptor, the Raptor RR25 setup has its own Ranger Raptor mud flap listing.

What Problem Do These Solve?

These mud flaps are for Ranger owners who have improved the stance of the ute and do not want the back end to look exposed. Flares help cover the wheel arch from the side. Wider mud flaps help tidy up the rear angle where spray, dirt and tyre poke are still visible.

  • Wider wheel setups: helps reduce the exposed tyre look from behind the ute.
  • Flare installs: makes the mud flap width match the visual weight of P25, S35 or EGR flares.
  • Daily driving: helps reduce road grime, water spray and stones flicking onto the lower body.
  • Clean fitment: gives a vehicle-specific answer instead of cutting, drilling or guessing with universal flaps.

Why Add Volcano Mud Flaps?

  • Extra width: +30mm wider mud flaps help cover spray, dirt and visual wheel poke from behind.
  • Flare friendly: pairs directly with Utemart P25, Utemart S35 and EGR Ranger flares.
  • No-drill fitment: refits into the original factory mud flap position with the supplied fit kit.
  • Strong TPE material: 4.2mm thick thermoplastic elastomer gives better flexibility and impact resistance than brittle hard plastic.
  • Cleaner finish: helps finish the look when running wider wheels, 285 tyres or mild-to-moderate offset changes.

Why Not Just Use Universal Mud Flaps?

Universal mud flaps can be cheap, but they usually leave the fitment problem with the customer. You may need to trim, drill, make templates or work out hardware yourself. That is fine for some builds, but most Ranger owners want the ute to look neat without turning a simple protection upgrade into a fabrication job.

The Volcano kit is the cleaner choice when you want a Ranger-specific mud flap that follows the factory position, suits the common flare setups and looks intentional on the vehicle.

Wheel and Flare Guide

Setup Mud Flap Suitability Recommendation
Factory wheels or mild upgrade Good everyday protection Use the mud flaps to reduce spray and protect the lower body.
P25 flares with 9 inch +25 or +20 wheels Strong pairing The +30mm mud flap helps finish the rear view where wider tyres can still show.
S35 or EGR flares Good flare-compatible fit Use with moderate wheel setups where extra spray and tyre coverage are wanted.
Tray-back Ranger Different rear fitment Use the tray-back mud flap kit instead.
Ranger Raptor Next Gen Different vehicle fitment Use the Raptor-specific Volcano mud flaps, especially when pairing with RR25 flares.

Fitment Notes

  • Vehicle: Ford Ranger Next Gen 2022, 2023, 2024, 2025 and 2026.
  • Body style: standard tub-body Ranger, not tray-back and not Ranger Raptor.
  • Models: XL, XLS, XLT, Sport, Platinum and Wildtrak dual cab models.
  • Kit: four-piece front and rear mud flap kit with fit kit included.
  • Width: +30mm wider than the standard factory-style mud flap shape.
  • Material: black 4.2mm thick TPE with grain face and smooth back.
  • Suspension: suitable for factory height Rangers and many setups up to around 50mm lift.
  • Fitment: refits into the original factory mud flap position.

Works With Ranger Fender Flares

These mud flaps are a natural add-on for Ranger flare setups because wheel poke is often most obvious from behind the ute. They pair directly with P25 slimline flares, S35 35mm flares and EGR Ranger flares.

For the full mudflap and flare pairing breakdown, see the Ranger mudflaps for flares and 285 tyres guide. For a full flare comparison, see the Ranger Next Gen flare guide. For all current buying guides, visit the Utemart write-ups.

Still Not Sure?

Send Utemart your Ranger model, year, body style, flare type, wheel width, offset and tyre size before ordering. A rear photo helps if the wheels and tyres are already fitted.

(122MF-R-F-R)

Volcano Off Road Mudflaps fit over flares into original factory position. Staps for securing mudflap from bending into tyre while reversing in mud sand or water. Replaces factory mudflaps.

Thank you for writing a review. By sharing your thoughts, you help website visitors make a better purchasing decision. In addition, your feedback helps us to improve our products and service.

Submit Review


There are currently no reviews for this product.

 

SHIPPING CALCULATOR



Pick up - $0.00
"Pick up" option must be selected on item