Ford Ranger Next Gen Fender Flare Guide
Are 35mm Fender Flares Enough for Your Ranger?
For many Ford Ranger Next Gen builds, 35mm fender flares are the sweet spot between clean daily-driver styling, practical tyre coverage and a wider stance.
The short answer is that 35mm flares are enough for a lot of Ford Ranger Next Gen wheel and tyre setups, but they are not a magic fix for every offset. If you are choosing fender flares for 285 tyres, 9 inch wheels or visible tyre poke, the real answer depends on wheel width, offset, tyre size, tyre sidewall shape, alignment, ride height and how much guard coverage you expect.
Quick Answer
35mm flares are usually enough for mild to moderate Ranger Next Gen builds. They are a strong match for many 9 inch wheel setups around +15 to +10 with suitable tyres, and they are a common choice for owners trying to cover 285 tyres without making the ute look over-flared. If you are running a very aggressive offset, wide tyre, or want maximum visual coverage, step up to a wider flare such as V45.
When 35mm Is Enough
A 35mm flare makes sense when the Ranger has more tyre poke than the factory guards can comfortably cover, but the wheel setup is still moderate. It gives the ute a wider stance, better side coverage and a more finished look without going straight to an oversized wide-body flare.
For Utemart's S35 Ranger flare kit, the product page lists fitment up to a 9 inch +10 wheel with 265 tyres, or up to a 9 inch +15 wheel with 285 tyres. That makes S35 the main Utemart recommendation when you want balanced 35mm coverage on a standard Ford Ranger Next Gen, especially if you are trying to tidy up wheel poke from a common aftermarket wheel and tyre package.
Use these notes as a practical guide, not a guarantee. Tyre brand, sidewall shape, wheel alignment and ride height all affect how much poke is visible.
Wheel Setup Guide
| Wheel / Tyre Setup | Are 35mm Flares Enough? | Better Option If Needed |
|---|---|---|
| 9 inch +30 with 285 tyres | Usually more flare than you need for this mild Ranger wheel offset. A slimmer 25mm flare may look cleaner. | P25 slimline flares. |
| 9 inch +25 with 285 tyres | Often enough, but some 285 tyre setups may still show slight sidewall poke depending on tyre shape. | P25 for a slimmer look, S35 for more coverage. |
| 9 inch +15 with 285 tyres | Usually a strong 35mm flare use case for Next Gen Ranger guard coverage. | S35 or EGR 35mm, depending on preferred finish and mounting style. |
| 9 inch +10 with 265 tyres | Within the S35 product page guidance for a moderate aftermarket Ranger setup. | S35 as the practical Utemart option. |
| 10 inch +0 or aggressive poke | 35mm may not be enough visually or practically for aggressive tyre poke. | V45 45mm flares. |
Unsure before ordering?Send us your wheel width, offset, tyre size and vehicle model before ordering.
Contact UtemartS35 vs EGR 35mm Flares
S35 and EGR are both 35mm Ford Ranger Next Gen flare options, but they suit different buyers. S35 is the practical Utemart 35mm choice for balanced coverage, value and everyday modified Rangers. EGR is the factory / dealer option style for buyers who specifically prefer the EGR finish and fitment pathway.
| Comparison Point | S35 35mm | EGR 35mm |
|---|---|---|
| Best For | Balanced coverage, value and everyday modified Rangers. | Factory / dealer option style and EGR finish preference. |
| Factory Trim Interaction | Utemart P25, S35 and V45 flares are designed to fit over the top of the factory black plastic wheel arch trims. | EGR flares require those factory trims to be removed. |
| Decision Path | Choose by tyre coverage, wheel specs and value. | Choose by finish and factory-style presentation. |
If your main question is tyre coverage, compare the actual wheel and offset guidance first. If your main question is finish and factory-style presentation, EGR may be the better comparison point.
When To Step Up To V45
Step up to V45 when the Ranger has a wider, more aggressive wheel setup and 35mm coverage is likely to look too close to the edge. The V45 kit is 45mm wide and 155mm high, giving it a wider visual stance than S35 and more guard coverage for aggressive wheel fitment.
The V45 product page lists support up to a 10 inch +0 setup. That makes it the better option when the build is intentionally pokey, when the wheels sit further outside the guards, or when you want the flare itself to look more aggressive on a modified Next Gen Ranger.
The V45 page also notes "No Sensor", so confirm fitment before ordering if your Ranger has sensor hardware around the flare area.
Surface Prep Matters
On taped flare kits, the tape bond is only as good as the surface preparation. The 3M tape used on flare kits is very strong when the guard area is cleaned, prepped and treated with the included primer.
The problem is hydrophobic paint protection. If the Ranger has ceramic coating or fresh wax around the guards, a taped flare such as S35 or V45 may not bond correctly. In that case, deal with the coating first or choose a flare style that better suits how the vehicle has been prepared.
What If It Still Looks Pokey?
Some owners deliberately like a pokey Ranger setup. Others are right on the edge of fitting inside the flares and mainly want the ute to look covered from behind. In those cases, wider mud flaps can help finish the build visually.
For example, Utemart runs P25 flares on a 9 inch +20 wheel setup with poke, but wider Volcano Offroad Ranger mud flaps help make it look covered from behind. The same idea can apply to 35mm flare setups that are close to the edge.
Recommended Products
S35 35mm
$498.00
The main Utemart recommendation when 35mm coverage is the right answer. Best for a balanced Ford Ranger Next Gen build that needs more than slimline coverage without going to the widest flare.
View S35 Flares
EGR 35mm
From $898.00
The factory / dealer option style 35mm alternative. Choose EGR if finish, trim removal and factory-style presentation matter more than getting the lowest 35mm flare price.
View Colour Coded EGR View Matte Black EGR
V45 45mm
$398.00
The step-up option when 35mm may not be enough. Best for wider, more aggressive Ranger wheel setups where you want more tyre coverage, stronger guard presence and a tougher stance.
View V45 Flares
P25 Slimline
$628.00
The slimmer alternative if 35mm is more flare than the build needs. Also the important comparison point for Ford Ranger PHEV buyers because the P25 page lists PHEV compatibility.
View P25 Flares
30mm Mud Flaps
Check product page
A useful add-on when the wheel setup is right on the edge of flare coverage, or when you want the rear view of the ute to look more covered with wider wheels and tyres.
View Ranger Mud FlapsCommon Questions
Are 35mm flares enough for 285 tyres?
Often, yes. For a Ford Ranger Next Gen, the S35 product page lists up to a 9 inch +15 wheel with 285 tyres. The final result still depends on tyre sidewall shape, wheel offset, alignment and how much tyre poke you are willing to see.
Are 35mm flares too wide for stock wheels?
They can be. If the Ranger is close to stock or only mildly modified, 25mm flares may look cleaner. Too much flare on a mild wheel setup can make the wheels look tucked in instead of giving the ute a clean guarded look.
Should I choose S35 or EGR?
Choose S35 if you want the practical Utemart 35mm option with strong value. Choose EGR if you prefer the factory / dealer option style and are comfortable with the trim removal and higher price point.
When should I choose V45 instead?
Choose V45 if the wheel setup is more aggressive, if the ute is still visibly pokey with 35mm flares, or if you want a wider and tougher flare shape for bigger wheel and tyre fitment.
Do 35mm flares suit Ranger PHEV?
Do not assume they do. The S35 product page says it does not suit PHEV vehicles. If you have a Ford Ranger PHEV, start with the P25 product page because it lists PHEV compatibility.
Can Utemart check my wheel setup first?
Yes. Send the vehicle model, year, wheel width, offset, tyre size and a side photo if possible. That gives the team enough detail to suggest whether P25, S35, EGR or V45 is the better Ford Ranger flare fit.
Need Help Choosing?
Send Utemart your Ranger model, wheel size, offset and tyre size. The team can help work out whether 35mm fender flares are enough for your Next Gen Ranger before you order.
Last updated: June 2026. Product prices, fitment notes and stock can change, so check the linked product page before ordering.
